How to adjust the shift cable on Lexus ES300?

When the shift lever inside the vehicle is moved from the Neutral position to other positions, it should move smoothly and accurately, with the shift indicator reflecting the correct gear position. If the indicator is misaligned, adjust the shift cable by first raising the vehicle and securely supporting it on jackstands, then removing the splash shields covering the area between the front of the vehicle and the lower crossmember. Loosen the swivel nut on the manual shift lever at the transaxle before adjusting the shift cable. Place the manual lever in Park and then return it two notches to the Neutral position. For four-cylinder models, push the manual lever all the way UP and return it two clicks to Neutral, while for V6 models, push the lever all the way DOWN and return it two clicks to Neutral. Ensure the shift lever inside the vehicle is in the Neutral position, hold it with slight pressure toward the REVERSE position, and tighten the swivel nut securely. Check the operation of the transaxle in each shift lever position, ensuring the starter operates only in the Park and Neutral positions. To replace the cable, disconnect it from the manual lever by loosening the swivel nut and removing the large C-clip cable retainer from the bracket above the manual lever. Remove the bolts from the cable housing retainer on the firewall and detach the center console. Pry off the large C-clip cable retainer from the shift lever base, remove the retaining clip, pull out the clevis pin, and disconnect the cable from the shift lever before pulling the cable through the firewall. Installation is the reverse of removal, and be sure to adjust the cable upon completion.

Genuine Lexus ES300 Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Shift Cables found

View related parts
Lexus ES300 Cable Assy, Transmission Control
Part Number: 33820-33250
$301.08 MSRP: $410.50
You Save: $109.42 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2002-2003 Lexus ES300 | 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 3MZFE; MCV30L-BEAGKA, MCV31L-BEAGKA
View related parts
Lexus ES300 Cable Assy, Transmission Control
Part Number: 33820-33140
$231.35 MSRP: $312.86
You Save: $81.51 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: BRAZIL SPEC
- Replaced by: 33820-06081
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1997-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; MCV20L-BTPGKA, MCV20L-BTPGKK
View related parts
Lexus ES300 Cable Assy, Transmission Control
Part Number: 33820-33161
Product Specifications
- Replaces: 33820-33160
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1998-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; MCV20L-BTPGKA, MCV20L-BTPGKK
View related parts
Lexus ES300 Cable Assy, Transmission Control
Part Number: 33820-33141
Product Specifications
- Manufacturer Note: BRAZIL SPEC
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2000-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; MCV20L-BTPGKA
View related parts
Lexus ES300 Cable Assy, Transmission Control
Part Number: 33820-33160
Product Specifications
- Replaced by: 33820-33161
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1998-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; MCV20L-BTPGKA, MCV20L-BTPGKK
View related parts
Lexus ES300 Cable Assy, Transmission Control
Part Number: 33820-33040
Product Specifications
- Replaced by: 33820-33041
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1992-1995 Lexus ES300 | 6 Cyl 3.0L | 1MZFE, 3VZFE; MCV10L-BTPGKA, MCV10L-BTPGKK, VCV10L-BTPGKA, VCV10L-BTPGKK
View related parts
Lexus ES300 Cable Assy, Transmission Control
Part Number: 33820-33041
Product Specifications
- Replaces: 33820-33040
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1992-1996 Lexus ES300 | 6 Cyl 3.0L | 1MZFE, 1MZFE; MCV10L-BTPGKA, 3VZFE; MCV10L-BTPGKA, MCV10L-BTPGKK, VCV10L-BTPGKA, VCV10L-BTPGKK

Lexus ES300 Shift Cable

Lexus ES300 Shift Cable provides the driver with simple and accurate control over the automatic gearbox by connecting it to the transmission manual lever using a manual control lever console shifter. Earlier models throughout the ES300 range saw Lexus and many of its rivals stick to rigid rods or levers, but this time the move to a flexible Shift Cable reduced cabin vibration and freed up interior space for the popular floor mounted shifter. Within the ES300 family, the Lexus design remained consistent, that of a steel core inside a low friction sheath, but minor updates were made to improve the coating materials to fight stretch and corrosion, keeping the Shift Cable responsive mile after mile. Unlike today's electronic shift by wire systems which rely on sensors instead of a mechanical connection, the ES300 still retains the feel of a physical Shift Cable which allows the driver to immediately feel when their gear is engaged. Routine inspection for fraying, bending, or excessive play can ensure the Lexus sedan continues to reward owners, and replacement of a worn Shift Cable is straightforward thanks to its accessible routing beneath the console.

Should you need to purchase new auto parts for your vehicle, we strongly suggest you consider the genuine Lexus ES300 Shift Cable available on LexusPartsNow.com. Our OEM Lexus ES300 Shift Cable come with the reassurance of the manufacturer's warranty, a hassle-free return policy, and speedy delivery service, all at affordable prices online. Feel free to shop with confidence!

Lexus ES300 Shift Cable Parts Questions & Experts Answers

Cable Assy, Transmission Control
33820-33161
Q: How to adjust the shift cable on Lexus ES300?
A:
When the shift lever inside the vehicle is moved from the Neutral position to other positions, it should move smoothly and accurately, with the shift indicator reflecting the correct gear position. If the indicator is misaligned, adjust the shift cable by first raising the vehicle and securely supporting it on jackstands, then removing the splash shields covering the area between the front of the vehicle and the lower crossmember. Loosen the swivel nut on the manual shift lever at the transaxle before adjusting the shift cable. Place the manual lever in Park and then return it two notches to the Neutral position. For four-cylinder models, push the manual lever all the way UP and return it two clicks to Neutral, while for V6 models, push the lever all the way DOWN and return it two clicks to Neutral. Ensure the shift lever inside the vehicle is in the Neutral position, hold it with slight pressure toward the REVERSE position, and tighten the swivel nut securely. Check the operation of the transaxle in each shift lever position, ensuring the starter operates only in the Park and Neutral positions. To replace the cable, disconnect it from the manual lever by loosening the swivel nut and removing the large C-clip cable retainer from the bracket above the manual lever. Remove the bolts from the cable housing retainer on the firewall and detach the center console. Pry off the large C-clip cable retainer from the shift lever base, remove the retaining clip, pull out the clevis pin, and disconnect the cable from the shift lever before pulling the cable through the firewall. Installation is the reverse of removal, and be sure to adjust the cable upon completion.