How to remove and replace the front sway bar bushing and sway bar link on Lexus RX330?

Sway Bar removal requires taking out the steering gear and then extracting the sway bar from the left wheel well. Damage to the sway bar is often due to severe accidents affecting other major components, necessitating professional repair services. For 2008 and later Highlander V6 and 4WD models, as well as 2009 through 2015 RX350 models, the engine/transaxle assembly must be removed to access the sway bar. Begin by loosening the front wheel lug nuts, raising the vehicle, and securely supporting it on jack stands before removing the front wheels. Disconnect the sway bar links by removing the lower nut, and if necessary, the upper nut if the strut is being removed. Detach both sway bar bushing retainers from the subframe, noting that on 2016 and later Lexus models, the right rear exhaust manifold must be removed for sway bar access. While the sway bar is detached, inspect the retainer bushings for cracks or wear and replace them if needed. Check the sway bar link by flipping the ball joint stud side-to-side and measuring the torque reading after tightening the nut. Clean the bushing area of the sway bar with a wire brush, then lubricate the new bushings with vegetable oil, ensuring the slits face the rear of the vehicle during installation. Finally, install the links and tighten the link nuts and retainers to the specified torque.

Genuine Lexus RX330 Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Sway Bar Bushings found

View related parts
Lexus RX330 Rear Stabilizer Bush
Part Number: 48818-0E010
$11.34 MSRP: $14.62
You Save: $3.28 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer, Rear; Bushing, Stabilizer Bar Bushing
- Position: Rear
- Replaces: 48818-48030
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSU35L-AWAGKA, 3MZFE; GSU35L-CWAGKA, MCU38L-AWAGKA, MCU38L-CWAGKA
View related parts
Lexus RX330 Stabilizer Bush
Part Number: 48815-0E010
$17.92 MSRP: $23.11
You Save: $5.19 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1; Bushing, Stabilizer Bar Bushing
- Replaces: 48815-48040
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSU30L-AWAGKA, 3MZFE; GSU30L-CWAGKA, GSU35L-AWAGKA, GSU35L-CWAGKA, MCU33L-AWAGKA, MCU33L-CWAGKA, MCU38L-AWAGKA, MCU38L-CWAGKA
View related parts
Lexus RX330 Stabilizer Bush
Part Number: 48815-48040
$18.06 MSRP: $23.11
You Save: $5.05 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Front Stabilizer Bar, NO.1
- Replaced by: 48815-0E010
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSU30L-AWAGKA, GSU35L-AWAGKA, MCU33L-AWAGKA, MCU38L-AWAGKA
View related parts
Lexus RX330 Rear Stabilizer Bush
Part Number: 48818-33050
$17.15 MSRP: $21.94
You Save: $4.79 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer, Rear
- Position: Rear
- Replaced by: 48818-06090
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSU30L-AWAGKA, MCU33L-AWAGKA
View related parts
Lexus RX330 Rear Stabilizer Bush
Part Number: 48818-48020
$10.99 MSRP: $14.45
You Save: $3.46 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer, Rear
- Position: Rear
- Replaced by: 48818-48021
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSU35L-AWAGKA, GSU35L-CWAGKA, MCU38L-AWAGKA, MCU38L-CWAGKA
View related parts
Lexus RX330 Rear Stabilizer Bush
Part Number: 48818-06120
$25.66 MSRP: $33.08
You Save: $7.42 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer, Rear; Bushing, Stabilizer Bar Bushing
- Position: Rear
- Replaces: 48818-48010
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSU30L-AWAGKA, 3MZFE; GSU30L-CWAGKA, MCU33L-AWAGKA, MCU33L-CWAGKA
View related parts
Lexus RX330 Rear Stabilizer Bush
Part Number: 48818-48030
$11.43 MSRP: $14.62
You Save: $3.19 (22%)
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer, Rear
- Position: Rear
- Replaced by: 48818-0E010
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSU35L-AWAGKA, MCU38L-AWAGKA
View related parts
Lexus RX330 Rear Stabilizer Bush
Part Number: 48818-48010
$25.86 MSRP: $33.08
You Save: $7.22 (22%)
ADD TO CART
Product Specifications
- Other Name: Bush, Stabilizer, Rear
- Manufacturer Note: TYPE B
- Position: Rear
- Replaced by: 48818-06120
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2004-2006 Lexus RX330 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSU30L-AWAGKA, MCU33L-AWAGKA

Lexus RX330 Sway Bar Bushing

Lexus RX330 Sway Bar Bushing refers to an important part of the car that greatly helps in boosting the reliability of the car and its performance levels. Specifically manufactured for the Lexus RX330, this Sway Bar Bushing is a key component in the vehicle for it ensures a comfortable drive by dampening humps on the road and also cutting off loud sounds. In supporting the sway bar it enables the vehicle body not to roll when turning which makes for enhanced safety while driving. The functionality of the Lexus RX330 cannot be complete without compatibility that is offered for both front and rear sway bars of the RX330 models. It is recommended to pay adequate attention when it comes to the replacement or changing of the Sway Bar Bushings because otherwise, a car will become slow to respond and it will also produce more noise which is not efficient and safety worthy. Lexus RX330 is known for many luxury attributes like a large interior and popular safety features and Sway Bar Bushing is also the element that makes the car's controllability better. Notably, Sway Bar Bushing is made of better material and, therefore, more durable and long-lasting in use, which constitutes a plus in automotive market. The Lexus RX330 Sway Bar Bushing is one of the keys that provides a refined drive quality associated with the performance of the Lexus, and it is a part of the RX330's fine engineering.

Should you need to purchase new auto parts for your vehicle, we strongly suggest you consider the genuine Lexus RX330 Sway Bar Bushing available on LexusPartsNow.com. Our OEM Lexus RX330 Sway Bar Bushing come with the reassurance of the manufacturer's warranty, a hassle-free return policy, and speedy delivery service, all at affordable prices online. Feel free to shop with confidence!

Lexus RX330 Sway Bar Bushing Parts Questions & Experts Answers

Stabilizer Bush
48815-0E010
Q: How to remove and replace the front sway bar bushing and sway bar link on Lexus RX330?
A:
Sway Bar removal requires taking out the steering gear and then extracting the sway bar from the left wheel well. Damage to the sway bar is often due to severe accidents affecting other major components, necessitating professional repair services. For 2008 and later Highlander V6 and 4WD models, as well as 2009 through 2015 RX350 models, the engine/transaxle assembly must be removed to access the sway bar. Begin by loosening the front wheel lug nuts, raising the vehicle, and securely supporting it on jack stands before removing the front wheels. Disconnect the sway bar links by removing the lower nut, and if necessary, the upper nut if the strut is being removed. Detach both sway bar bushing retainers from the subframe, noting that on 2016 and later Lexus models, the right rear exhaust manifold must be removed for sway bar access. While the sway bar is detached, inspect the retainer bushings for cracks or wear and replace them if needed. Check the sway bar link by flipping the ball joint stud side-to-side and measuring the torque reading after tightening the nut. Clean the bushing area of the sway bar with a wire brush, then lubricate the new bushings with vegetable oil, ensuring the slits face the rear of the vehicle during installation. Finally, install the links and tighten the link nuts and retainers to the specified torque.

Related Lexus RX330 Parts

Browse by Year

2006 Sway Bar Bushing 2005 Sway Bar Bushing 2004 Sway Bar Bushing