How to remove and install the hood latch and hood cable on the Lexus RX350?

On 2014 and later models, remove the grille. Scribe a line around the latch to aid alignment when installing, then remove the retaining bolts securing the hood latch to the radiator support. To adjust the hood latch horizontally or vertically, loosen these bolts. Remove the latch. Disconnect the hood cable by disengaging the cable from the latch. Pry out the cable retainer from the backside of the hood latch assembly, then disengage the cable. Installation is the reverse of removal. Adjust the latch so the hood engages securely when closed and the hood bumpers are slightly compressed. Working in the passenger compartment, lift the hood release handle lever upward, then pull down on the cable housing end and disengage the cable from the hood release lever handle. Lift upward on the handle and pull the cable housing end from the base of the handle, then detach the cable end from the lever. If the handle lever needs to be replaced simply pull outward on the handle retaining tab and push downward to release it from the instrument panel. Attach a piece of thin wire or string to the end of the cable. Working in the engine compartment, disconnect the hood cable from the latch. Unclip all the cable retaining clips on the radiator support and the inner fenderwell. Pull the cable forward into the engine compartment until you can see the wire or string, then remove the wire or string from the old cable and fasten it to the new cable. With the new cable attached to the wire or string, pull the wire or string back through the firewall until the new cable reaches the inside handle. Working in the passenger compartment, install the new cable into the hood release lever, making sure the cable housing fits snugly into the notch in the handle bracket. Pull on the cable with your fingers from the passenger compartment until the cable stop seats in the grommet on the firewall. The remainder of the installation is the reverse of removal.

Genuine Lexus RX350 Hood Latch

Engine Hood Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Hood Latches found

View related parts
Lexus RX350 Hood Lock Assembly
Part Number: 53510-0E010
$71.36 MSRP: $94.96
You Save: $23.60 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Hood
- Replaced by: 53510-0C040
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2007-2009 Lexus RX350 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSU30L-CWAGKA, GSU35L-CWAGKA, MCU33L-CWAGKA, MCU38L-CWAGKA
View related parts
Lexus RX350 Hood Lock Assembly
Part Number: 53510-0E021
$80.18 MSRP: $108.44
You Save: $28.26 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Hood; Lock
- Replaces: 53510-0E020
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010-2015 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE, 2GRFE; GGL10L-CWTGKA, 2GRFXE; GGL10L-CWTGKA, GGL15L-CWTGKA, GGL15L-CWZGKA, GYL10L-CWXGKA, GYL15L-CWXGKA
View related parts
Lexus RX350 Hood Lock Assembly
Part Number: 53510-48070
$71.36 MSRP: $94.96
You Save: $23.60 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Hood
- Replaced by: 53510-0C040
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2007-2009 Lexus RX350 | STD | 6 Cyl 3.3L, 6 Cyl 3.5L | 2GRFE, 3MZFE; GSU30L-AWAGKA, GSU35L-AWAGKA, MCU33L-AWAGKA, MCU38L-AWAGKA
View related parts
Lexus RX350 Hood Lock Assembly
Part Number: 53510-0E130
$80.18 MSRP: $108.44
You Save: $28.26 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Hood; Lock
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | 6 Cyl 3.5L | 2GRFKS, 2GRFXS; GGL20L-CWZGBA, GGL25L-CWZGBA, GYL20L-CWXGBA, GYL25L-CWXGBA
View related parts
Lexus RX350 Hood Lock Assembly
Part Number: 53510-48251
$80.18 MSRP: $108.44
You Save: $28.26 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Hood; Lock
- Replaces: 53510-48250
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2022 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFKS, 2GRFXS; GGL25L-AWZGBA, GGL25L-BWZGBA, GYL25L-AWXGBA
View related parts
Lexus RX350 LOCK ASSY, HOOD
Part Number: 53510-0E220
$50.36 MSRP: $67.01
You Save: $16.65 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch, Lock
- Replaces: 53510-78050
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2025 Lexus RX350 | 4 Cyl 2.4L, 4 Cyl 2.5L | A25AFXS, AALH16L-AWXGBA, T24AFTS; AALH15L-AWXGBA, T24AFTS; AALH15L-CWXGBA, TALA10L-AWZGTA, TALA10L-CWZGTA, TALA15L-CWZGTA, TALH17L-AWTGTA, TALH17L-CWTGTA
View related parts
Lexus RX350 LOCK ASSY, HOOD
Part Number: 53510-78050
$50.36 MSRP: $67.01
You Save: $16.65 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch
- Replaced by: 53510-0E220
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2023-2025 Lexus RX350 | 4 Cyl 2.4L, 4 Cyl 2.5L | A25AFXS, T24AFTS; AALH15L-AWXGBA, AALH16L-AWXGBA, TALA10L-AWZGTA, TALH17L-AWTGTA
View related parts
Lexus RX350 Hood Lock Assembly
Part Number: 53510-0E020
$81.49 MSRP: $108.44
You Save: $26.95 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Hood
- Replaced by: 53510-0E021
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE; GGL10L-CWTGKA, GGL15L-CWTGKA
View related parts
Lexus RX350 Hood Lock Assembly
Part Number: 53510-48211
$72.24 MSRP: $96.12
You Save: $23.88 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Hood
- Replaced by: 53510-48212
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010-2015 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE, 2GRFXE; GGL10L-AWTGKA, GGL15L-AWTGKA, GYL10L-AWXGKA, GYL15L-AWXGKA
View related parts
Lexus RX350 Hood Lock Assembly
Part Number: 53510-48250
$81.49 MSRP: $108.44
You Save: $26.95 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Hood
- Replaced by: 53510-48251
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2020 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFKS, 2GRFXS; GGL25L-AWZGBA, GGL25L-BWZGBA, GYL25L-AWXGBA
View related parts
Lexus RX350 Hood Lock Assembly
Part Number: 53510-48210
$72.24 MSRP: $96.12
You Save: $23.88 (25%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly, Hood
- Replaced by: 53510-48212
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010 Lexus RX350 | STD | 6 Cyl 3.5L | 2GRFE, 2GRFXE; GGL10L-AWTGKA, GGL15L-AWTGKA, GYL10L-AWXGKA, GYL15L-AWXGKA

Lexus RX350 Hood Latch

The Lexus RX350 Hood Latch keeps the hood secure so that it will not open up suddenly, which can protect the important parts of the engine as well as the driver's ability to see the road clearly. On the Lexus RX350, this small assembly of steel called the Hood Latch is located below the front portion of the hood, connecting an internal release handle and cable to a spring-loaded catch that locks in tightly until the driver activates the handle. By holding the panel tightly, the Hood Latch protects the engine, radiator, and battery from weather, debris, and thieves, and also helps to protect the hood from smashing the windshield in the event of a collision. Early Lexus RX350 models and later updates are based on the same basic single-stage catch, but newer versions often have a stainless shutter to block out dirt and moisture, slowing rust and adding to the service life. Regardless of what year the Hood Latch is made, it is made with a backup safety hook in mind so if the main catch loosens, a secondary catch or tab is still in place preventing the hood from flying up at highway speed. One matched key can open all factory locks, making access to every Lexus RX350 much easier without additional hardware. The Hood Latch is essential for ensuring safety and security while driving.

Should you need to purchase new auto parts for your vehicle, we strongly suggest you consider the genuine Lexus RX350 Hood Latch available on LexusPartsNow.com. Our OEM Lexus RX350 Hood Latch come with the reassurance of the manufacturer's warranty, a hassle-free return policy, and speedy delivery service, all at affordable prices online. Feel free to shop with confidence!

Lexus RX350 Hood Latch Parts Questions & Experts Answers

Hood Lock Assembly
53510-48070
Q: How to remove and install the hood latch and hood cable on the Lexus RX350?
A:
On 2014 and later models, remove the Grille. Scribe a line around the latch to aid alignment when installing, then remove the retaining bolts securing the hood latch to the radiator support. To adjust the hood latch horizontally or vertically, loosen these bolts. Remove the latch. Disconnect the hood cable by disengaging the cable from the latch. Pry out the cable retainer from the backside of the hood latch assembly, then disengage the cable. Installation is the reverse of removal. Adjust the latch so the hood engages securely when closed and the hood bumpers are slightly compressed. Working in the passenger compartment, lift the hood release handle lever upward, then pull down on the cable housing end and disengage the cable from the hood release lever handle. Lift upward on the handle and pull the cable housing end from the base of the handle, then detach the cable end from the lever. If the handle lever needs to be replaced simply pull outward on the handle retaining tab and push downward to release it from the instrument panel. Attach a piece of thin wire or string to the end of the cable. Working in the engine compartment, disconnect the hood cable from the latch. Unclip all the cable retaining clips on the radiator support and the inner fenderwell. Pull the cable forward into the engine compartment until you can see the wire or string, then remove the wire or string from the old cable and fasten it to the new cable. With the new cable attached to the wire or string, pull the wire or string back through the firewall until the new cable reaches the inside handle. Working in the passenger compartment, install the new cable into the hood release lever, making sure the cable housing fits snugly into the notch in the handle bracket. Pull on the cable with your fingers from the passenger compartment until the cable stop seats in the grommet on the firewall. The remainder of the installation is the reverse of removal.

Related Lexus RX350 Parts

Browse by Year

2025 Hood Latch 2024 Hood Latch 2023 Hood Latch 2022 Hood Latch 2021 Hood Latch 2020 Hood Latch 2019 Hood Latch 2018 Hood Latch 2017 Hood Latch 2016 Hood Latch 2015 Hood Latch 2014 Hood Latch 2013 Hood Latch 2012 Hood Latch 2011 Hood Latch 2010 Hood Latch 2009 Hood Latch 2008 Hood Latch 2007 Hood Latch