Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Contact Us Help Center
Make sure this part fits

Lexus 43502-28100 Front Axle Hub Sub-Assembly Left Hand

2003-2018 Lexus 4350228100

Customer Questions & Expert Answers (7)
43502-28100 Lexus Front Axle Hub Sub-Assembly Left Hand Product Photo 1 of 2
43502-28100 Lexus Front Axle Hub Sub-Assembly Left Hand Product Photo 1 of 2
43502-28100 Lexus Front Axle Hub Sub-Assembly Left Hand Product Photo 2 of 2
43502-28100 Lexus Front Axle Hub Sub-Assembly Left Hand Illustration 1 of 1
  • Part Description
    Hub Sub-Assy, Front Axle, Lh
  • Position
    Front Driver Side
  • Replaced By
    43502-0E030
  • Manufacturer
    Lexus
Make sure this part fits
$136.76 MSRP: $184.95
You Save: $48.19 (27%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Specifications
  • Fitment
  • Q&A

  • Related Parts

    Shop for related parts for your vehicle

  • Product Specifications

    BrandGenuine Lexus
    Manufacturer Part Number43502-28100
    Part DescriptionHub Sub-Assy, Front Axle, Lh
    Item Dimensions5.6 x 3.7 x 5.7 inches
    Item Weight4.60 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerLexus
    SKU43502-28100
    WarrantyThis genuine Lexus part is guaranteed by Lexus's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65

  • Vehicle Fitment

    Year Make Model Trim & Engine Important vehicle option details
    2003 Lexus ES3006 Cyl 3.3L3MZFE; MCV31L-BEAGKA
    2013-2018 Lexus ES300h4 Cyl 2.5L, 6 Cyl 3.5L2ARFXE, 2GRFE; AVV60L-BEXGBA, GSV60L-BETGKA
    2004-2006 Lexus ES3306 Cyl 3.3L3MZFE; MCV31L-BEAGKA
    2007-2015 Lexus ES3504 Cyl 2.5L, 6 Cyl 3.5L2ARFXE, 2GRFE; AVV60L-BEXGBA, GSV40L-BETGKA, GSV60L-BETGKA
    2004-2006 Lexus RX330STD|6 Cyl 3.3L, 6 Cyl 3.5L2GRFE, 3MZFE; GSU30L-AWAGKA, GSU35L-AWAGKA, MCU33L-AWAGKA, MCU38L-AWAGKA
    2007-2015 Lexus RX350STD|6 Cyl 3.3L, 6 Cyl 3.5L2GRFE, 2GRFXE, 3MZFE; GGL10L-AWTGKA, GGL15L-AWTGKA, GSU30L-AWAGKA, GSU35L-AWAGKA, GYL10L-AWXGKA, GYL15L-AWXGKA, MCU33L-AWAGKA, MCU38L-AWAGKA
    2006-2008 Lexus RX400hSTD|6 Cyl 3.3L3MZFE; MHU33L-AWXGKA, MHU38L-AWXGKA
    2010-2015 Lexus RX450hSTD|6 Cyl 3.5L2GRFE, 2GRFXE; GGL10L-AWTGKA, GGL15L-AWTGKA, GYL10L-AWXGKA, GYL15L-AWXGKA

  • Customer Questions & Expert Answers

    Q:
    I am trying to confirm fitment Posted by LexusPartsNow Specialist
    A:
    You can Select Your Vehicle to check if 43502-28100 fits your vehicle.
    Posted by LexusPartsNow Specialist
    Q:
    Should the Wheel Hub and bearing be pressed from the steering knuckle by a professional shop on Lexus ES350? Posted by Customer
    A:
    Due to the special tools and expertise required to press the hub and bearing from the steering knuckle, this job should be left to a professional shop. However, the steering knuckle and hub may be removed and the assembly taken to a dealer service department or other repair shop.
    Posted by LexusPartsNow Specialist
    Q:
    How to remove and replace the Wheel Hub and bearing assembly on the Lexus ES350? Posted by Customer
    A:
    Loosen the wheel lug nuts, raise the vehicle and support it securely on jack stands. Remove the wheel. Remove the brake drum or disc from the hub. If equipped, disconnect the wheel speed sensor. Remove the four hub-to-axle carrier bolts, accessible by turning the hub flange so that the large circular cutout exposes each bolt. To remove the four bolts that attach the hub and bearing assembly to the rear axle carrier, rotate the hub flange and align one of the holes in the flange with each of the bolts. Remove the hub and bearing assembly from its seat, maneuvering it out through the brake assembly. Remove the old O-ring from the hub seat and install a new one. Wheel bearing grease may be used to keep the O-ring in place before installing the hub-and-bearing assembly. Position the hub and bearing assembly on the axle carrier and align the holes in the backing plate. Install the bolts. A magnet is useful in guiding the bolts through the hub flange and into position. After all four bolts have been installed, tighten them to the torque. Install the brake drum, or disc and caliper, and the wheel. Lower the vehicle and tighten the lug nuts to the torque.
    Posted by LexusPartsNow Specialist
    Q:
    How to remove and install the rear Wheel Hub and bearing assembly on Lexus RX330? Posted by Customer
    A:
    The following procedure applies to 2WD models only; for 4WD models, special tools and expertise are required to press the hub and bearing from the rear axle carrier, so this job should be left to a professional shop. However, the axle carrier and hub may be removed and the assembly taken to a dealer service department or other repair shop. The rear hub and bearing assembly is not serviceable; if found to be defective, it must be replaced as a unit. To begin removal, loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands before removing the wheel. Next, remove the disc from the hub and disconnect the wheel speed sensor electrical connector. Then, remove the four hub-to-axle carrier bolts by turning the hub flange to expose each bolt. After that, remove the hub and bearing assembly from its seat, maneuvering it out through the parking brake assembly. For installation, position the hub and bearing assembly on the axle carrier and align the holes in the backing plate before installing the bolts, using a magnet to guide them into position. Once all four bolts are installed, tighten them to the specified torque, then install the disc and caliper, followed by the wheel. Finally, lower the vehicle and tighten the lug nuts to the specified torque.
    Posted by LexusPartsNow Specialist
    Q:
    How to remove and install the rear Wheel Hub and bearing assembly on Lexus RX350? Posted by Customer
    A:
    The following procedure applies to 2WD models only; for 4WD models, special tools and expertise are required to press the hub and bearing from the rear axle carrier, so this job should be left to a professional shop. However, the axle carrier and hub may be removed and the assembly taken to a dealer service department or other repair shop. The rear hub and bearing assembly is not serviceable; if found to be defective, it must be replaced as a unit. To begin removal, loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands before removing the wheel. Next, remove the disc from the hub and disconnect the wheel speed sensor electrical connector. Then, remove the four hub-to-axle carrier bolts by turning the hub flange to expose each bolt. After that, remove the hub and bearing assembly from its seat, maneuvering it out through the parking brake assembly. For installation, position the hub and bearing assembly on the axle carrier and align the holes in the backing plate before installing the bolts, using a magnet to guide them into position. Once all four bolts are installed, tighten them to the specified torque, then install the disc and caliper, followed by the wheel. Finally, lower the vehicle and tighten the lug nuts to the specified torque.
    Posted by LexusPartsNow Specialist
    Q:
    Is this the only part I need to complete the task? Does this part have the bearing pressed in already? Posted by Customer: 2012 Lexus RX350 or RX450h
    A:
    YOU WILL NEED A FEW MORE PARTS TO COMPLETE THE JOB AND YOU WILL NOT TO PRESS IN THE HUB INTO THE BEARING. AXLE NUT #90080-17238 QTY 1 BEARING #90369-45006 QTY 1 SNAP RING #90520-79002 QTY 1 WHEEL BEARING DUST DEFLECTOR #43246-48011 QTY1
    Posted by LexusPartsNow Specialist 22/9/2025
    Q:
    Does this part fit BOTH driver side and passenger side? Posted by Customer: 2004 Lexus RX330 or RX350
    A:
    YES
    Posted by LexusPartsNow Specialist 30/6/2025
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine Lexus Part 43502-28100, the Right Choice

Getting part # 43502-28100 Front Axle Hub Sub-Assembly Left Hand helps restore factory performance. It is also referred to as Wheel Hub. This part works with 2003 ES300, 2013-2018 ES300h, 2007-2015 RX350, 2006-2008 RX400h. Purchasing OEM parts for your vehicle should be your top priority. Manufactured by Lexus, they are built to meet high standards and utilize only top-notch materials for decent reliability and durability.

LexusPartsNow.com offers dependable parts and accessories including 4350228100 Front Axle Hub Sub-Assembly Left Hand. Visit our website for the most preferential OEM parts online. Each part is backed by the OEM manufacturer warranty, confirming its high level of quality. We deliver all our parts fast and they come with a straightforward return policy.

Why choose Lexus Parts Now

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly