Lexus 47311-33301 Tube, Front Brake, NO.1

When replacing flexible hoses, follow these steps:1.Loosen wheel lug nuts and raise the vehicle on jackstands.2.Remove the wheel for access.3.Unscrew the brake line fitting from the hose using a flare-nut wrench to protect the corners.4.Remove the U-clip from the bracket at the frame and pass the hose through.5.At the caliper end, remove the banjo fitting bolt and separate the hose from the caliper, replacing copper washers.6.Remove the U-clip from the strut bracket and feed the hose through.7.Connect the caliper fitting to the caliper using the banjo bolt and washers.8.Insert the metal support into the strut bracket, install the U-clip, and ensure the hose isn't twisted.9.Route the hose into the frame bracket, connect the brake line fitting, and secure it with a clip and E-ring if present.10.Bleed the caliper, install the wheel, lower the vehicle, and tighten the lug nuts.