Q: How do I remove and install Instrument Panel Light Bulb and Interior Light Bulb of the Lexus ES300?
A: For Front Park/Turn Signal Light removal, start by removing the plastic pin or screw securing the top of the housing, then pull the sidelight housing outward to access the bulbs. Rotate the bulb holder counterclockwise and remove the bulb. Reinstallation is the reverse of removal.For Rear Tail Light/Brake Light/Turn Signal removal, body-mounted lights on Avalon models require lens detachment via two screws, while on Camry and Solara models, pull back the trunk lining to access the bulbs. Rotate the bulb holders counterclockwise and pull out the bulbs. Access trunk-lid bulbs by pulling down inspection covers. Installation is the reverse of removal.For License Plate Light removal, with the trunk liner removed, take out the license plate bulb sockets and replace the bulbs. Reinstallation is the reverse of removal.For High-Mounted Brake Light removal, release plastic clips under the rear seat package shelf in the trunk, then pull the housing up from inside the vehicle. Twist the bulb holder counterclockwise and remove the bulb. Reinstallation is the reverse of removal.For Instrument Cluster Removal, access the instrument cluster illumination bulbs by removing and replacing them from the rear of the cluster. Rotate the bulb counterclockwise to remove it. Reinstallation is the reverse of removal.For Interior Light Removal, pry off the interior lens, then detach the bulb from the terminals. Be cautious when prying to avoid shattering the bulb glass. Reinstallation is the reverse of removal.