How to remove and install Instrument Panel Light Bulb and Interior Light Bulb on Lexus ES300?

For Front Park/Turn Signal Light removal, start by removing the plastic pin or screw securing the top of the housing, then pull the sidelight housing outward to access the bulbs. Rotate the bulb holder counterclockwise and remove the bulb. Reinstallation is the reverse of removal.For Rear Tail Light/Brake Light/Turn Signal removal, body-mounted lights on Avalon models require lens detachment via two screws, while on Camry and Solara models, pull back the trunk lining to access the bulbs. Rotate the bulb holders counterclockwise and pull out the bulbs. Access trunk-lid bulbs by pulling down inspection covers. Installation is the reverse of removal.For License Plate Light removal, with the trunk liner removed, take out the license plate bulb sockets and replace the bulbs. Reinstallation is the reverse of removal.For High-Mounted Brake Light removal, release plastic clips under the rear seat package shelf in the trunk, then pull the housing up from inside the vehicle. Twist the bulb holder counterclockwise and remove the bulb. Reinstallation is the reverse of removal.For Instrument Cluster Removal, access the instrument cluster illumination bulbs by removing and replacing them from the rear of the cluster. Rotate the bulb counterclockwise to remove it. Reinstallation is the reverse of removal.For Interior Light Removal, pry off the interior lens, then detach the bulb from the terminals. Be cautious when prying to avoid shattering the bulb glass. Reinstallation is the reverse of removal.

Genuine Lexus ES300 Instrument Panel Light Bulb

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Instrument Panel Light Bulbs found

View related parts
Lexus ES300 Bulb
Part Number: 90981-11018
$3.28 MSRP: $4.31
You Save: $1.03 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb(For Glove Box)
- Position: Rear
- Replaces: 00060-00074, 83119-02030
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1992-2003 Lexus ES300 | 6 Cyl 3.0L, 6 Cyl 3.3L | 1MZFE, 3MZFE, 3VZFE; MCV10L-BTPGKA, MCV10L-BTPGKK, MCV20L-BTPGKA, MCV20L-BTPGKK, MCV30L-BEAGKA, MCV31L-BEAGKA, VCV10L-BTMGKA, VCV10L-BTMGKK, VCV10L-BTPGKA, VCV10L-BTPGKK
View related parts
Lexus ES300 Bulb, Combination Meter, NO.1
Part Number: 83109-30070
$6.62 MSRP: $8.47
You Save: $1.85 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1992-1996 Lexus ES300 | 6 Cyl 3.0L | 1MZFE, 3VZFE; MCV10L-BTPGKA, MCV10L-BTPGKK, VCV10L-BTMGKA, VCV10L-BTMGKK, VCV10L-BTPGKA, VCV10L-BTPGKK
View related parts
Lexus ES300 Bulb, Combination Meter, NO.1
Part Number: 83119-24570
$7.83 MSRP: $10.30
You Save: $2.47 (24%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Manufacturer Note: 14V 3.0W,BLUE CAP
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1992-1996 Lexus ES300 | 6 Cyl 3.0L | 1MZFE, 3VZFE; MCV10L-BTPGKA, MCV10L-BTPGKK, VCV10L-BTMGKA, VCV10L-BTMGKK, VCV10L-BTPGKA, VCV10L-BTPGKK
View related parts
Lexus ES300 Bulb, Meter
Part Number: 83119-32010
$3.89 MSRP: $4.97
You Save: $1.08 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb, Combination Meter, NO.1
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1998-2001 Lexus ES300 | 6 Cyl 3.0L | 1MZFE; MCV20L-BTPGKA, MCV20L-BTPGKK
- 1992-1996 Lexus ES300 | 6 Cyl 3.0L | 1MZFE, 3VZFE; MCV10L-BTPGKA, MCV10L-BTPGKK, VCV10L-BTMGKA, VCV10L-BTMGKK, VCV10L-BTPGKA, VCV10L-BTPGKK
View related parts
Lexus ES300 Bulb
Part Number: 99132-12034
$1.03 MSRP: $1.31
You Save: $0.28 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb, Position Indicator Lamp
- Manufacturer Note: 12V 3.4W
- Replaced by: 00234-00158
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1992-1996 Lexus ES300 | 6 Cyl 3.0L | 1MZFE, 3VZFE; MCV10L-BTPGKA, MCV10L-BTPGKK, VCV10L-BTPGKA, VCV10L-BTPGKK
View related parts
Lexus ES300 Bulb
Part Number: 83119-50050
$9.48 MSRP: $12.13
You Save: $2.65 (22%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulb, Combination Meter, NO.1
- Manufacturer Note: 14V 3.0W,LONG LIFE
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1992-1995 Lexus ES300 | 6 Cyl 3.0L | 1MZFE, 3VZFE; MCV10L-BTPGKA, MCV10L-BTPGKK, VCV10L-BTPGKA, VCV10L-BTPGKK
View related parts
Lexus ES300 Bulb, Combination Meter, NO.1
Part Number: 83101-20080
Product Specifications
- Manufacturer Note: 12V 1.4W,W(SOCKET)
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 1992-1996 Lexus ES300 | 6 Cyl 3.0L | 1MZFE, 3VZFE; MCV10L-BTPGKA, MCV10L-BTPGKK, VCV10L-BTMGKA, VCV10L-BTMGKK, VCV10L-BTPGKA, VCV10L-BTPGKK

Lexus ES300 Instrument Panel Light Bulb

The Lexus ES300 Instrument Panel Light Bulb allows drivers to clearly read speed, fuel, and warning gauges after sunset to encourage confident and safe trips. Inside each generation of Lexus sedan, there is an Instrument Panel Light Bulb located behind the cluster, which glows through the symbols so that the information pops up immediately. Earlier ES300 models were based on a small incandescent Instrument Panel Light Bulb that glows warm and is inexpensive but tends to fade and burn out sooner. Later ES300 years saw the LED style Instrument Panel Light Bulb units, which emit brighter color consistent light and use less battery power than their filament predecessors while lasting far longer. Both styles of bulb plug into the same sockets in the dashboard, so replace a tired incandescent with the LED variation and you'll get those visuals back with no change to original Lexus cabin design. Since the Instrument Panel Light Bulb is on whenever headlights are, monitoring the light bulb brightness allows owners to detect wear early and keep the Lexus interface readable. Replacing a dim ES300 Instrument Panel Light Bulb takes only minutes and does not sacrifice critical nighttime data visibility.

Should you need to purchase new auto parts for your vehicle, we strongly suggest you consider the genuine Lexus ES300 Instrument Panel Light Bulb available on LexusPartsNow.com. Our OEM Lexus ES300 Instrument Panel Light Bulb come with the reassurance of the manufacturer's warranty, a hassle-free return policy, and speedy delivery service, all at affordable prices online. Feel free to shop with confidence!

Lexus ES300 Instrument Panel Light Bulb Parts Questions & Experts Answers

Bulb
90981-11018
Q: How to remove and install Instrument Panel Light Bulb and Interior Light Bulb on Lexus ES300?
A:
For Front Park/Turn Signal Light removal, start by removing the plastic pin or screw securing the top of the housing, then pull the sidelight housing outward to access the bulbs. Rotate the bulb holder counterclockwise and remove the bulb. Reinstallation is the reverse of removal.For Rear Tail Light/Brake Light/Turn Signal removal, body-mounted lights on Avalon models require lens detachment via two screws, while on Camry and Solara models, pull back the trunk lining to access the bulbs. Rotate the bulb holders counterclockwise and pull out the bulbs. Access trunk-lid bulbs by pulling down inspection covers. Installation is the reverse of removal.For License Plate Light removal, with the trunk liner removed, take out the license plate bulb sockets and replace the bulbs. Reinstallation is the reverse of removal.For High-Mounted Brake Light removal, release plastic clips under the rear seat package shelf in the trunk, then pull the housing up from inside the vehicle. Twist the bulb holder counterclockwise and remove the bulb. Reinstallation is the reverse of removal.For Instrument Cluster Removal, access the instrument cluster illumination bulbs by removing and replacing them from the rear of the cluster. Rotate the bulb counterclockwise to remove it. Reinstallation is the reverse of removal.For Interior Light Removal, pry off the interior lens, then detach the bulb from the terminals. Be cautious when prying to avoid shattering the bulb glass. Reinstallation is the reverse of removal.