Lexus 90981-11018 Bulb

For Front Park/Turn Signal Light removal, start by removing the plastic pin or screw securing the top of the housing, then pull the sidelight housing outward to access the bulbs. Rotate the bulb holder counterclockwise and remove the bulb. Reinstallation is the reverse of removal.For Rear Tail Light/Brake Light/Turn Signal removal, body-mounted lights on Avalon models require lens detachment via two screws, while on Camry and Solara models, pull back the trunk lining to access the bulbs. Rotate the bulb holders counterclockwise and pull out the bulbs. Access trunk-lid bulbs by pulling down inspection covers. Installation is the reverse of removal.For License Plate Light removal, with the trunk liner removed, take out the license plate bulb sockets and replace the bulbs. Reinstallation is the reverse of removal.For High-Mounted Brake Light removal, release plastic clips under the rear seat package shelf in the trunk, then pull the housing up from inside the vehicle. Twist the bulb holder counterclockwise and remove the bulb. Reinstallation is the reverse of removal.For Instrument Cluster Removal, access the instrument cluster illumination bulbs by removing and replacing them from the rear of the cluster. Rotate the bulb counterclockwise to remove it. Reinstallation is the reverse of removal.For Interior Light Removal, pry off the interior lens, then detach the bulb from the terminals. Be cautious when prying to avoid shattering the bulb glass. Reinstallation is the reverse of removal.

To get to the front park/turn signal lights on the ES350, lift up the headlight assembly and turn the bulb holder clockwise to take out the bulb when ready to install them back, performing the reverse motion for removal. To reach the taillight, brake light, and turn signal bulbs, lift the trunk cover, turn the bulb holders counterclockwise to release them, then reinstall the holders in the exact same direction. To change the high brake light above the window, remove the angle by your back seat, pull the bulb from its slot by turning it counterclockwise, then pull the bulb straight out, reversal for installation. To replace instrument panel lightbulbs, detach the instrument panel, then rotate light bulbs counterclockwise to remove them before putting them back in from the same side. The interior light requires you to take off the lens cover, disconnect the bulb from its terminal contacts, and put everything back in the opposite direction. You can fix the license plate light by following these steps: press the release clip, move the light housing inwards, turn it, twist the bulb holder tail counterclockwise to get a new bulb, then put everything back in the exact opposite order. If you need to change the fog light bulb, first lift up your car, take out its front wheels and fender covers, and turn the bulb holder counterclockwise to pull it from the light housing. To replace the side turn signal light on ES350 models, carefully peel off the cover on top of the wing mirror, take out the mounting screws, unhook the light mount, unscrew the bulb counterclockwise, put it back in place by turning it clockwise.