To get to the front park/turn signal lights on the ES350, lift up the headlight assembly and turn the bulb holder clockwise to take out the bulb when ready to install them back, performing the reverse motion for removal. To reach the taillight, brake light, and turn signal bulbs, lift the trunk cover, turn the bulb holders counterclockwise to release them, then reinstall the holders in the exact same direction. To change the high brake light above the window, remove the angle by your back seat, pull the bulb from its slot by turning it counterclockwise, then pull the bulb straight out, reversal for installation. To replace instrument panel lightbulbs, detach the instrument panel, then rotate light bulbs counterclockwise to remove them before putting them back in from the same side. The interior light requires you to take off the lens cover, disconnect the bulb from its terminal contacts, and put everything back in the opposite direction. You can fix the license plate light by following these steps: press the release clip, move the light housing inwards, turn it, twist the bulb holder tail counterclockwise to get a new bulb, then put everything back in the exact opposite order. If you need to change the fog light bulb, first lift up your car, take out its front wheels and fender covers, and turn the bulb holder counterclockwise to pull it from the light housing. To replace the side turn signal light on ES350 models, carefully peel off the cover on top of the wing mirror, take out the mounting screws, unhook the light mount, unscrew the bulb counterclockwise, put it back in place by turning it clockwise.