How to disconnect and remove the ignition switch,Ignition Lock Cylinder and steering lock actuator assembly on Lexus ES350?

Disconnect the cable from the negative battery terminal. Place the ignition key in the ACC position. Remove the steering wheel. Remove the steering column covers. Remove the steering column switches. Unplug the ignition switch wiring harness connector and key light connector (if equipped). Remove the interlock solenoid mounting screws and disengage the ignition switch mounting clips, then pull the switch from the housing. Installation is reverse of removal. Carefully pry the transponder key amplifier switch mounting clips outwards and slide the transponder forward to detach it and the bracket from the steering column. Turn the ignition switch to ON (ACC). Use a small screwdriver or punch inserted into the hole in the top of the steering column bracket to depress the locking claw and pull the Ignition Lock Cylinder out until its claw comes into contact with the stopper of the steering column bracket. Insert the tip of a screwdriver into the hole inside of the steering column bracket and tilt it downward to disengage the claw. Pull the Ignition Lock Cylinder out. The remainder of installation is the reverse of removal. After replacing the steering lock actuator assembly, perform the key ID code registration by opening and closing the driver's door. The engine may not start until the driver's door has been opened and closed. Remove the steering column and place the column in a soft jaw vise. Using a grinder or small hacksaw blade, cut a slot into the steering lock shear bolt heads. Use a screwdriver to back the bolts out and remove the actuator. Install the steering lock actuator and steering column clamp with new steering lock shear-head bolts, then tighten the bolts until their heads break off.

Genuine Lexus ES350 Ignition Lock Assembly

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Ignition Lock Assemblies found

View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-30020
$319.91 MSRP: $443.44
You Save: $123.53 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start
- Replaced by: 89611-30025
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2007-2009 Lexus ES350 | 6 Cyl 3.5L | 2GRFE; GSV40L-BETGKA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-11010
$286.86 MSRP: $391.10
You Save: $104.24 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start; Power Switch, Start Button
- Replaced by: 89611-11012
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2019-2023 Lexus ES350 | 4 Cyl 2.5L, 6 Cyl 3.5L | 2GRFKS, A25AFKS; AXZA15L-BEZGBA, GSZ10L-BEZGBA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-30021
$319.91 MSRP: $443.44
You Save: $123.53 (28%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start
- Replaced by: 89611-30025
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2008-2010 Lexus ES350 | 6 Cyl 3.5L | 2GRFE; GSV40L-BETGKA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-11011
$282.16 MSRP: $391.10
You Save: $108.94 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, PUSH START; Power Switch, Start Button
- Replaced by: 89611-11012
- Replaces: 89611-11010
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2022-2024 Lexus ES350 | 4 Cyl 2.5L, 6 Cyl 3.5L | 2GRFKS, A25AFKS; AXZA15L-BEZGBA, GSZ10L-BEZGBA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-30022
$319.91 MSRP: $443.44
You Save: $123.53 (28%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start
- Replaced by: 89611-30025
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2010-2012 Lexus ES350 | 6 Cyl 3.5L | 2GRFE; GSV40L-BETGKA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-11020
$290.63 MSRP: $402.85
You Save: $112.22 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start; Power Switch, Start Button
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2019-2023 Lexus ES350 | 4 Cyl 2.5L | A25AFXS; AXZH10L-BEXGBA, AXZH11L-BEXGBA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-30120
$286.86 MSRP: $391.10
You Save: $104.24 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start
- Replaced by: 89611-30124
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2013 Lexus ES350 | 6 Cyl 3.5L | 2GRFE; GSV60L-BETGKA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-30121
$286.86 MSRP: $391.10
You Save: $104.24 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start
- Replaced by: 89611-30124
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2013-2015 Lexus ES350 | 6 Cyl 3.5L | 2GRFE; GSV60L-BETGKA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-30023
$319.91 MSRP: $443.44
You Save: $123.53 (28%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start
- Replaced by: 89611-30025
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2011-2012 Lexus ES350 | 6 Cyl 3.5L | 2GRFE; GSV40L-BETGKA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-0E052
$290.63 MSRP: $402.85
You Save: $112.22 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start; Power Switch, Start Button
- Replaces: 89611-0E051
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2018 Lexus ES350 | 6 Cyl 3.5L | 2GRFE; GSV60L-CETGKA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-30132
$319.91 MSRP: $443.44
You Save: $123.53 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start; Power Switch, Start Button
- Replaces: 89611-30131, 89611-30130
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2013-2015 Lexus ES350 | 4 Cyl 2.5L | 2ARFXE; AVV60L-BEXGBA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-30122
$286.86 MSRP: $391.10
You Save: $104.24 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start
- Replaced by: 89611-30124
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2015 Lexus ES350 | 6 Cyl 3.5L | 2GRFE; GSV60L-BETGKA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-0E051
$295.47 MSRP: $402.85
You Save: $107.38 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start
- Replaced by: 89611-0E052
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2016-2017 Lexus ES350 | 6 Cyl 3.5L | 2GRFE; GSV60L-CETGKA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-30130
$325.24 MSRP: $443.44
You Save: $118.20 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start; Power Switch, Start Button
- Replaced by: 89611-30132
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2013 Lexus ES350 | 4 Cyl 2.5L | 2ARFXE; AVV60L-BEXGBA
View related parts
Lexus ES350 Push Start Switch
Part Number: 89611-30131
$325.24 MSRP: $443.44
You Save: $118.20 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Push Start
- Replaced by: 89611-30132
- Warranty: This genuine part is guaranteed by Lexus's factory warranty.
Fits the following Vehicles:
- 2013-2015 Lexus ES350 | 4 Cyl 2.5L | 2ARFXE; AVV60L-BEXGBA

Lexus ES350 Ignition Lock Assembly

The Lexus ES350 Ignition Lock Assembly protects the car by only allowing a coded key to transmit power to the starter, engine systems, and components. Early models of the Lexus ES350 featured a conventional steering column-mounted Ignition Lock Assembly that included a lock cylinder and electrical switch that required the appropriate metal key to rotate through a sequence of OFF, ACC, ON, and START. Later versions of the Lexus ES350 featured a coded key as part of the same basic Ignition Lock Assembly, the embedded chip linking to the computer to operate the engine crank only if the code is correct, preventing thieves from starting the car by forcing the cylinder. Regardless of generation, the Ignition Lock Assembly also locks the steering wheel in the LOCK position and ties into the shift interlock. In any Lexus ES350, wear or failed contacts inside the Ignition Lock Assembly can jam the key, prevent cranking, or cut power while driving.

Should you need to purchase new auto parts for your vehicle, we strongly suggest you consider the genuine Lexus ES350 Ignition Lock Assembly available on LexusPartsNow.com. Our OEM Lexus ES350 Ignition Lock Assembly come with the reassurance of the manufacturer's warranty, a hassle-free return policy, and speedy delivery service, all at affordable prices online. Feel free to shop with confidence!

Lexus ES350 Ignition Lock Assembly Parts Questions & Experts Answers

Push Start Switch
89611-30020
Q: How to disconnect and remove the ignition switch,Ignition Lock Cylinder and steering lock actuator assembly on Lexus ES350?
A:
Disconnect the cable from the negative battery terminal. Place the ignition key in the ACC position. Remove the steering wheel. Remove the steering column covers. Remove the steering column switches. Unplug the ignition switch wiring harness connector and key light connector (if equipped). Remove the interlock solenoid mounting screws and disengage the ignition switch mounting clips, then pull the switch from the housing. Installation is reverse of removal. Carefully pry the transponder key amplifier switch mounting clips outwards and slide the transponder forward to detach it and the bracket from the steering column. Turn the ignition switch to ON (ACC). Use a small screwdriver or punch inserted into the hole in the top of the steering column bracket to depress the locking claw and pull the Ignition Lock Cylinder out until its claw comes into contact with the stopper of the steering column bracket. Insert the tip of a screwdriver into the hole inside of the steering column bracket and tilt it downward to disengage the claw. Pull the Ignition Lock Cylinder out. The remainder of installation is the reverse of removal. After replacing the steering lock actuator assembly, perform the key ID code registration by opening and closing the driver's door. The engine may not start until the driver's door has been opened and closed. Remove the steering column and place the column in a soft jaw vise. Using a grinder or small hacksaw blade, cut a slot into the steering lock shear bolt heads. Use a screwdriver to back the bolts out and remove the actuator. Install the steering lock actuator and steering column clamp with new steering lock shear-head bolts, then tighten the bolts until their heads break off.

Related Lexus ES350 Parts

Browse by Year