Lexus 48510-80577 ABSORBER Assembly, Shock

Attach the brake hose bracket and wheel speed sensor harness to the strut.

Loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands. Remove the wheel and support the control arm with a floor jack.

Place the floor jack with a wooden block under the rear suspension arm below the coil spring pocket and raise the arm approximately 1 inch. Keep the jack in this position.

If the struts or coil springs exhibit signs of wear such as leaking fluid, loss of damping capability, or physical damage, explore all options before beginning any work. The strut/shock absorber assemblies are not serviceable and must be replaced if a problem develops. Strut assemblies complete with springs may be available on an exchange basis, which can save time and effort. Always check the cost and availability of parts before disassembling your vehicle.