Lexus 48531-0E191 ABSORBER, Shock, Rear

Remove the panels on the cowl to access the top of the struts and, for 2008 and later Highlander models, remove the windshield wiper arms and motor, side seals, and plastic cowl below the wiper motor assembly.

Have an assistant maneuver the assembly up into the fenderwell and insert the mounting studs through the holes in the body. Install the nuts, but don't tighten them yet.

Tighten the mounting nuts and bolts to the specified torque.

If the struts or coil springs exhibit signs of wear such as leaking fluid, loss of damping capability, or physical damage, explore all options before beginning any work. The strut/shock absorber assemblies are not serviceable and must be replaced if a problem develops. Strut assemblies complete with springs may be available on an exchange basis, which can save time and effort. Always check the cost and availability of parts before disassembling your vehicle.

48531-0E191 x2 sold separately.