Lexus 12316-20020 Bracket, Engine Mounting, NO.2 RH

Carefully raise the engine until the engine mount studs clear the subframe, then remove the nut from the top of the mount and angle the engine mount from the vehicle. It may be necessary to loosen the other mounts at the subframe to raise the engine for extra clearance.

Yes, it will be necessary to loosen the mounting nuts on the other powertrain mounts at the subframe to allow the engine to be raised enough for clearance for the passenger side mount removal.

To remove an engine mount, remove the fasteners, raise the engine, and detach the mount. The engine can be raised with an engine hoist or with a floor jack and wood block placed under the oil pan. Note that even if only one mount is being replaced, the mount-to-engine bracket nut from the other mount should be removed to allow the engine to be raised far enough for mount removal.