Lexus 12321-0P020 Bracket, Engine Mounting, Rear(For Transverse Engine)

Rubber preservative should be applied to the mounts to slow deterioration.

Remove the movement-control rod bolts and the engine movement control rod, then remove the mounting bolts and the engine mounting brace.

Raise the vehicle and support it securely on jackstands. Then, position a jack under the engine oil pan, placing a large wood block between the jack head and the oil pan. Carefully raise the engine just enough to take the weight off the mounts, ensuring not to position the wood block under the drain plug.

Working below the vehicle, remove the nut securing the mount to the upper and lower brackets. Then, remove the bolts securing the mount to the frame and raise the engine enough to allow removal of the mount.

To remove an engine mount, remove the fasteners, raise the engine, and detach the mount. The engine can be raised with an engine hoist or with a floor jack and wood block placed under the oil pan. Note that even if only one mount is being replaced, the mount-to-engine bracket nut from the other mount should be removed to allow the engine to be raised far enough for mount removal.

Remove the movement-control rod bolts and the engine movement control rod, then remove the mounting bolts and the engine mounting brace.