Lexus 43330-09560 Front Lower Ball Joint Assembly, Right

Loosen the wheel lug nuts, raise the vehicle, and support it securely on jackstands. Remove the wheel. If you're going to remove the balljoint using a puller, loosen the driveaxle/hub nut before raising the vehicle.

1. Remove the wheel speed sensor. 2. Separate the control arm from the balljoint. 3. Pull the outer end of the driveaxle from the steering knuckle and suspend the driveaxle with a piece of wire. 4. Remove the cotter pin from the balljoint stud and loosen the nut a few turns (but don't remove it yet). 5. Install a small puller to separate the balljoint from the steering knuckle and pop the balljoint stud loose. 6. Remove the nut and the balljoint.